	Cable, Harness and Backplane Testing Made Easy!
	Home Our Products Support Technical Tips Contact Us

1-800-441-9910

Standard Adapters | Special Adapters | easy-wire Components | Adapter Demo

CH2 Connector Savers

Quick View

Questions or comments? Call our sales department ~ Toll Free 1-800-441-9910
	View of CH2 Connector Saver Assembly - Disassembled. Cirris has recently developed a new 'Connector Saver design' to accommodate our new CH2 connector orientation and spacing. The idea is to provide our customers with a easy-to-use and convenient connector saver that is "low cost" yet easy to implement and use. The CH2 connector saver ( part# ADCS-C2 ), comes with all the pieces required to get you up and going in just a few minutes. Using a connector saver on your CH2 tester will preserve the usable life of the original connectors on the tester. In addition, using these connector savers improves the efficiency of mating and de-mating your cables to the tester.

Connector savers mounted on front of CH2 tester with cables plugged on.

CH2 Connector Saver Assembly Installed on CH2 Tester.

The connector saver assembly is a slim design and will not add significant weight or bulk to your test station. However, the assembly not only "saves" your connectors on the tester but the easy-flip latches firmly hold the cable connectors to the tester and allow easy and fast release when you wish to remove your cables.

If you are using a CH2 to test your cables and find that you often mate and un-mate to the tester, we strongly recommend the use of this type of connector saver assembly to preserve the life of your tester connectors.

Call your Cirris sales representative for pricing and delivery details.

Cirris Systems- Our Products- Adapters- CH2 Connector Savers
Toll-free 1-800-441-9910