| Here is a very unique 18 pos. connector with bare mating pins displayed. This connector was mounted to a standard G-10 framestand board (ACLP-G1) and wired down to a standard 20 position dual row female connector. That connector can in turn be mated to our standard AHED-20 adapter. (not shown) |
A rectangular ZIF connector is mounted to a clear framestand board. This 100 position connector is wired through ribbon cables to two 64 pos. dual row female connectors which are mated to standard AHED-64 header adapters. |
Another interesting project! Common connectors need to mate to a flex cable. (bends in one plane.) The connectors needed to be positioned precisely on the framestand board to allow easy mating to the flex cable under test. As with the others the connectors are attached via cable to the standard adapters below. |
