Specifications
Capacity
64 points “local”; 128 points when 2 systems are used together
Test Levels
9 volts DC (current limited to 2.0 mA max)
Test Threshold
Connections < 4kΩ, opens > 4kΩ ±20%
Test Rate
Local: 64 points in .5 second
Remote: 128 points in .5 second (test time increases as cable length
increases)
Max Capacitance
.1 μF
Signature
6 digit hexadecimal. Separate signatures for wire-list and twisted-pair list.
Memory
“Last learned” cable (battery backed-up). External cable tokens, one cable per token.
Printer Output
RS-232 serial port with DB9 female connector. Data rates 110, 150, 300, 600, 1200, 2400, 4800, 9600, 19200 baud, 8 data bits, no parity.
Probe
For test-point identification (local tester only). Port accepts standard .175" banana jack for use with wrist-strap.
Power Required
110-240 VAC, 50-60 Hz Standard 9 volt battery. Typical operating time 12 hours on 500 mA hour alkaline battery, 2.5 hours on 7.2 volt 100 mA hour NiCad battery (included). NiCad can be recharged in place using the wall transformer. Battery save feature, auto shut-off after approximately 5 minutes of non-use.
Dimensions
8.5"h x 2.2"d x 5.5"w (21 x 5.5 x 13.5 cm)
Weight
1.2 lbs (545 grams)
Display
2 line x 16 character supertwist LCD
Memory
Nonvolatile storage of up to 50 wirelists. Lithium battery backup.