|
|
|
| Capacity | 128 to 1024 points in 128-point increments |
| Test Levels | Low Voltage Tests: 5 volts @ 6mA max current High Voltage Tests: 1000V: 50-1000VDC ±5% |
| Sensitivity | Connection Resistance:.1 ohm to 100k ohm ±1% ±.1 ohm also: 500k ohm, 1M ohm, 5M ohm ±10% 4-wire Resistance: .001 to 10 ohm ±2% ±.001 ohm High Voltage Insulation Resistance: 5M ohm to 1G ohm ±10% High Voltage Dwell (duration): 10 ms to 120 seconds |
| Capacitance | 5nF to 100µF ±10% ±.02nF (relative measurements to 10pF) |
| Components Tested | Resistors, diodes, capacitors, wires, switches, twisted pairs, and custom components |
| Test Rate | Connection Test: 128 points/.25 second (typical) Hipot Test: 10 ms to 120 sec dwell per net High speed hipot test user selectable on/off |
| Max Capacitance Per Net | 1000V/1500V/2000V:@ 50V, 100, 200, and 300V 0.2µF @ 400V 150nF, 500V 80nF, 630V 65nF, 800V 33nF, 1000V 20nF 1500V/2000V:@ 1500VDC 15nF, @ 1000VAC 2.5nF 2000V@ 2000VDC 14nF |
| HV Energy Limit | 35 mJoules |
| Usable Humidity Range | 0 to 95% RH (WARNING, I.R. and DWV test results will degrade when Relative Humidity exceeds 75%) |
| Controller | Built-in Pentium-class PC with 1 floppy and 1 hard drive. Serial, parallel, keyboard, and monitor ports standard. Ethernet port optional. |
| Point Labeling | User-definable labels of up to 30 characters, also custom file descriptions of up to 30 characters. |
| Power | 105-135VAC 60Hz or 210-260VAC 50Hz - switchable |
| Size | Main Unit (128 test points): 22" x 9" x 6.5" (56 x 24 x 17 cm) Add-on: 6.25" x 9" x 6.5" (16 x 24 x 17 cm) |
| Weight | Main Unit (128 test points): 25.4 lbs. (11.25 kg) Add-on (128 test points): 6 lbs. (2.7 kg) |
| Display | 3½" x 4½" Graphical Touch Screen |
| Warranty | One year parts and labor. |
© Cirris Systems Corp