Cirris Systems Success Stories

Success Stories

	Testing Variable Resistors of a Virtual Reality Glove
	Test an interactive glove containing a flex circuit with resistive load cells on each finger.   The glove needs to be tested in an open and closed fist position... - more information

	Guided Assembly of Catheters
	Help guide the assembly of a medical catheter which has numerous conductive rings at the end.   Each ring needs to be wired to the correct pin on a connector at the base of the catheter.   This isn't your ordinary second side pinning application... - more information

	Testing for Intermittent Connections
	Customer needed to test for intermittant shorts as fast as possible on booster rocket seperation cables... - more information

	Hipot Testing a PCB Four-Up
	Hipot test a printed circuit board. The board is already in production, being built and continuity tested four-up.   Re-using existing fixturing saves money... - more information

	Same Side Shield Testing
	Make sure wires really are inside a shield. It's possible to miswire the shield connections so a given pair of conductors are housed in the wrong shield... - more information

	Testing the Breakdown Voltage of Gas Fuses
	Customer needed to test the breakdown voltage across gas fuses. - more information

	Assembly Instruction Prompts
	Customers requested a method to pass written instructions to the test person during the testing process. - more information

	Version Control of Test Programs
	This customer requested a method to institute an automated revision control approach for all his test/wirelist programs. - more information

	Testing Thermisters; Compensating for Room Temperature Changes
	The customer was looking for a inexpensive and simple way to automatically compensate for room temperature changes while testing thermisters. - more information

	Change Hipot Voltage Per Net
	This project required a way to test selected portions of an assembly with various hipot voltages and dwell times while keeping other portions of the assembly protected from all voltages. - more information

	Testing Rotary Switches
	How to test a medical device containing a rotary switch having 4 poles with 16 positions per pole.   A second selector switch acts as a pole selector for the first switch. - more information

	Testing Data Transformers
	This custom test dramatically reduced the number of field failures by making the final assembly test quicker and more robust.   As the defects went down, throughput went up! - more information

Many of these applications use scripting.  For more information on scripting see: Scripting Language Option for the Touch 1/1100R+/1100H+