Cirris Software Download Page
PLEASE NOTICE: All zipped folders are password protected. In addition, a "Product Code" is required to install your software selection. Call Cirris for both. 1-800-441-9910The contents of each downloadable zip file are designed to fit on one(1) High Density 3 1/2" diskette. (the exception to this rule is the "easy-wire" software which is in the 34 MB range.) When you download multiple zip files be sure to label your diskettes in sequence to keep track of which disks to load first.
CTLYNX & CTLWIN
EASY-WIREEasy-wire Software for CR, CH+ and CH2: Version 8.9.0 (10 October 2007) 75,573 KB, This software runs on Windows 98 (2nd Edition), ME, 2000 and XP. (WILL NOT WORK ON WINDOWS 95 or NT!)WARNING! Before upgrading to ANY new Version of this software be sure to BACK-UP your exsisting test files first!
easy-wire Release Notes - (version 5.0 thru 8.9.0) TOUCH 1 - 1000V, 1500V, 2000VOLDEST, TOUCH 1 ~ VERSION 2.55 Units with Serial Numbers, 10000-T1 thru 10599-T1 with 4 Meg of RAM installed. (1000V only)
NEXT OLDEST, TOUCH 1 ~ VERSION 3.191 Units with Serial Numbers 10600-T1 thru 10942-T1 with 8 Meg of RAM installed. (1000V only)
MOST CURRENT, TOUCH 1 ~ VERSION 5.1a (8 May 2008) Updates 1000V, 1500V and 2000V systems. Serial Number 25000-T1 and up! (Update works only with the Linux Operating System.) If the Linux OS is installed on your tester, Disk 1 & 2 are sufficient to upgrade to the latest release. However, if your tester is running the DOS operating system (testers with software Vers. 3.191 or earlier) and wish to move up to this newest release, you will need to install Disks 4, 5 & 6 as well. ***( Your testers Serial Number MUST be 25000-T1 or higher in order for the Linux OS to install correctly on your hardware.) ***
Networking ME (Version 1.1.0)Networking Made Easy (Version 1.1.0) This software is used with our Touch 1 model testers which have the networking option installed. (password required)
TOUCH 1 ULTRATOUCH 1 ULTRA ~ VERSION 1.5 (7 May 2008) This software is usable only with our specialty Touch 1 product titled the 'Touch 1 Ultra'.
1100 Series (1100-R+ and 1100-H+)1100 Series Software ~ Version 4.5f (21 January 2008) The same software updates both the 1100-R+ and the 1100-H+ analysers. To understand the download and install sequence please read the Readme File.
SPC LINKSPC LINK Version 2.4 (1 Jun 02) If you already have version 2.2 loaded on your computer, you only need to upgrade the executable file to upgrade the complete package. The following link downloads the executable zip file: SPC Link - Executable File(WILL NOT WORK ON WINDOWS 95 or NT!) If you have a version older than 2.2 OR are installing for the first time. Download the zip file below which contains all the files you will need to do a FULL INSTALL of this program.
SPC MADE EASYSPC MADE EASY Version 3.1.0 (10 October 2007) This is the latest version of this program. It has recently been upgraded and improved. The following link downloads the zip file:SPC Made Easy - Zip File CH+ Original [ designed for 'Windows 3.1']Original CH+ Software - Version 16.6 (Apr 01) Originally designed for use on the Windows 3.1 operating System. This is 16 bit software. This software will operate on Windows 3.1, 95 and 98 but we recommend migrating to our 32 bit, Easywire Software [see above] which is designed to work with both the CR, CH+ and CH2 testers on the newer Windows platforms. IE: 2000, XP, Vista.
|