Intermittent defects create a lot of frustration especially if these defects escape the production process. Harnesses with intermittent problems that get assembled into a larger product are likely to malfunction after they are delivered to the end user.
These pages show that with the right process and the right tester you can effectively stop intermittents from occuring in your cables and harnesses.
|For an introduction to intermittents see: Testing Intermittents Video 1 (3.1 MB, Audio and Video, 2 minute run time, requires Flash plug-in).|
|To learn how to make sure your tester and your test process will catch intermittents see: Testing Intermittents Video 2 (3.8 MB, Audio and Video, 2 minute run time, requires Flash plug-in).|
|For an in-depth discussion of testing cables and harnesses for intermittents read our article on Testing Intermittents.|